Who makes them?
We “I2R Tech” Lighting Solutions are the Manufacturer of these Patent-pending Inverting Brackets. We manufacture them in Vietnam and sell worldwide.
What are these Brackets for?
These Brackets are used to invert or hang upside down Lighting fixtures or artifacts. Such as a Moving Head, or a smoke machine, or a Laser, firework machine, etc. There are applications where inverting the Light increases the range or performance of it. Such as when Followspotting with a Moving Head.
How big can a Moving Head fit?
Hi there, the maximun clearance for a Moving Head (or any other Light, or Effect Machine) is about 570mm (or 22.5 inches)
Do these work with the Rockville totems?
As long as the separation between the totems is similar to a square 12in truss yes. Alterntively, you can drill mounting holes for any custom application.
Does it fit Global Trussing?
Hi there, yes of course. These brackets are made for any standard 12x12 inches, square Aluminum trusses with 2 inches diameter pipes.
Will it fit trust glow totems?
Global Truss Totems are the standard 12x12 square dimensions, with 2" pipes. They fit.
MOVING CONTROLLER 2.0
Can I use my own Chauvet (specific brand) moving heads with this controller?
We make all of our products with universality in mind. This controller can control up to 6 Lights simultaneously, regardless of their brand, or position, and makes them all point to the same Spot with the one Joystick. We recommend using our I2R-BSW200 Lights since they are optimized to work great as Followspotters, but any Light can be used.
Can I control my par cans with this?
Yes of course. The controller has 3 main modes of operation. The simplest one called Sliders Mode and is best used with static Lights like Uplights, Smoke machines, Firework Machines etc. We have several tutorial YouTube videos showing how to do that.
Can I mix different light brands for Followspotting?
Yes of course. We make all of our products with universality in mind. This controller can control up to 6 Lights simultaneously, regardless of their brand, or position, an makes them all point to the same Spot with the one Joystick. We recommend using our Lights since they are optimized to work great as Followspotters, but any Light can be used.
Could this controller be used in the follow function using a combination of scanners and moving yoke fixtures at the same time? Just needs x and y?
Sure, it can. The limitation is on the scanner range, but if the scanners are placed appropriately for the intended target, then yes.